logo
Good price online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Waterproof DC Connectors
Created with Pixso. 5521 DC Power Plug IP68 Locking Waterproof Connector 4A 220V Nylon Housing for Marine Solar Lighting

5521 DC Power Plug IP68 Locking Waterproof Connector 4A 220V Nylon Housing for Marine Solar Lighting

Brand Name: BETT
Model Number: 5521 Locking Plug
MOQ: 100 Pairs
Price: USD 0.35-0.75 / Pair
Delivery Time: 7-10 working days
Payment Terms: T/T, L/C, D/P
Detail Information
Place of Origin:
China
Certification:
CE, UL, RoHS
Connector Format:
5521 Barrel Plug 5.5mm OD X 2.1mm ID
Waterproof Rating:
IP68 At Mated Joint
Rated Current:
4A
Rated Voltage:
220V
Contact Material:
Nickel-plated Copper Alloy
Housing Material:
PA66 Flame-retardant Nylon
Pin Count:
2
Cable Outer Diameter:
3-5mm
Cable Section:
0.75mm2 Max
Mating Cycles:
5000
Operating Temperature:
-20C To +80C
Locking Type:
Threaded Collar With O-ring Seal
Packaging Details:
100 pairs per PE bag, 20 bags per export carton
Supply Ability:
50000 Pairs per Month
Highlight:

Thread locking 5521 DC plug

,

IP68 sealed marine connector

,

4A nylon housing DC plug

Product Description

Built for Wet Installations That Shake

A 5521 barrel plug that survives rain, spray and constant vibration. The threaded collar screws the joint closed instead of relying on friction, while a silicone O-ring keeps moisture out of the contact chamber. Nickel-plated copper carries the full 4A load without heating up, and the PA66 nylon shell keeps its shape after years of UV exposure.

  • IP68Sealed Joint
  • 4A / 220VRated Load
  • 5000Mating Cycles
  • PA66UV-Stable Shell

Why the Joint Stays Closed

  • Threaded Locking CollarRotate the collar to clamp the male and female halves together. Vibration on pumps, deck rails and vehicle panels will not walk the plug loose.
  • Silicone O-Ring BarrierA single moulded seal sits behind the collar and compresses as you tighten, blocking splash, salt spray and dust at the mating line.
  • Nickel-Plated Copper ContactsPlating slows oxidation in humid air, keeping contact resistance low so the plug runs cool at the full 4A current.
  • Flame-Retardant Nylon ShellPA66 body resists cracking from sunlight and temperature swings between -20°C and +80°C, common on outdoor fixtures.

Fit and Wiring Compatibility

The barrel follows the 5521 industry footprint: 5.5mm outer diameter with a 2.1mm centre pin, so it mates with the DC sockets already used on most LED drivers and low-voltage adapters. The rear cable entry accepts 3mm to 5mm jacket diameters and conductors up to 0.75mm², which covers typical 0.5mm² and 0.75mm² lighting cable without shimming.

  • Two-pin polarity, solder or crimp termination at the tail
  • Mates with standard 5521 panel sockets and inline receptacles
  • Black shell as standard, colour coding available for polarity marking
  • Sold as a male plug, or as matched male and female pairs on request

Specification Sheet

Connector Format5521 barrel plug (5.5mm OD x 2.1mm ID)
Waterproof RatingIP68 at the mated joint
Current / Voltage4A maximum / 220V
Contact MaterialCopper alloy, nickel plated
Housing MaterialPA66 flame-retardant nylon, UV stabilised
Locking MethodThreaded collar with compressed O-ring
Cable RangeOuter diameter 3-5mm, conductor up to 0.75mm²
Service Life5000 insertion and removal cycles
Temperature Range-20°C to +80°C
CertificationCE, UL, RoHS

Installation Steps

  1. Slide the locking collar and the rear gland nut onto the cable before you strip the jacket.
  2. Strip 8-10mm of jacket, twist the strands and terminate the two conductors on the plug tails.
  3. Pull the cable back so the gland grips the jacket, then thread the collar onto the socket and hand tighten until the O-ring compresses.

Hand tightening is enough to reach the IP68 seal. Avoid using pliers on the collar, because over-torque can split the nylon threads.

Typical Installations

  • Solar garden and pathway luminaires exposed to rain and sprinklers
  • Marine deck, pontoon and dock lighting where salt spray is constant
  • Outdoor channel letters, light boxes and signage power feeds
  • RV, caravan and boat cabin DC circuits subject to road vibration
  • Fountain, pond and irrigation pump power lines
  • E-bike and scooter charging ports that need a locking connection

Ordering and Customisation

Standard packs ship in 100-pair PE bags inside export cartons, and trial orders of 100 pairs are welcome so buyers can test the seal before scaling up. For project runs we can pre-assemble a 0.3m to 2m cable length onto the plug, laser or print your part number on the shell, and colour match the collar to your fixture housing.

Send us your cable specification, jacket diameter and target IP rating. We will confirm a sample build and the production lead time for your order quantity.